Jablotron

GS-133 Gas Detector - 12 V DC

The GS-130 detector is used to indicate leaking of combustible gases (natural gas, methan, propane, butane, hydrogene).The detector detects two levels of gas concentration - different output reactions.

Gas Detector - 12 V DC

GS-133 Gas Detector - 12 V DC

The main GS-133 features are: high reliability and sensitivity, compact size and long stability & lifetime.

Tekniske spesifiseringer

Sensitivity:
Methane Propane
Level 1 10± 3 % LEL (0.44 % vol. conc.) 18±3 % LEL (0.30% vol. conc.)
Level 2 18±3 % LEL (0.80 % vol. conc.) 30±3 % LEL (0.50% vol. conc.)
Iso-butane Hydrogene
Level 1 23±3 % LEL (0.30 % vol. conc.) 9±3% LEL (0,36 % vol. conc.)
Level 2 40±3 % LEL (0.50% vol. conc.) 16±3% LEL (0,66 % vol. conc.)

LEL = Lower Explosive Limit (100 %) according to EN 60079-20-1:for methane 4,4 % vol. conc., for prophane 1,7 % vol. conc., for iso-buthane 1,3 % vol. conc., for hydrogene 4,1 % vol. conc., calibrated by iso-butane

Devices according to EN 50194-1, cl.1 type A
Power supply 12 V DC ± 20 %
Power consumption 100 mA (150 mA when relay is activated)
Detection method hot platinum filament
Buzzer sound level 94 dB/0.3 m
Relay output optional for 1st or 2nd level, max. 24 V AC / 2 A
Alarm memory selectable
Response time 20 s
Warm up time approximately 90 s
Working environment indoor use, -10 to +40°C, IP32D
Working humidity max 80 %
Designed to operate at normal atmospheric pressure 86 to 106 kPa
Equipment according to EN 50194-1 type A
Complies with EN 60079-29-1, EN 50130-4, EN, 50270, EN 55032, EN 62368-1. EN 50581
For non-explosive areas
Certified by FTZÚ, certificated body No. 3051

Relaterte produkter

EI208DW Standalone CO detektor

Produktet vil detektere CO- (karbonmonoksid-)gass og gi tidlig varsel for å unngå de skadelige effektene av denne gassen på menneskers helse.

EI208W Standalone CO detektor

Produktet vil detektere CO- (karbonmonoksid-)gass og gi tidlig varsel for å unngå de skadelige effektene av denne gassen på menneskers helse.

GS-208-CO Wired module for connection of the Ei208W(D) CO detector

This is a plug-in module designed for direct integration in the Ei208W or Ei208DW stand-alone CO detector that will enable its wired connection to a security or another system.

LD-12 Flood detector

The detector is a water flood indicator for rooms (e.g. cellars, bathrooms). This information is sent to an alarm system for alert message transmission.The LD-12 detector can be connected to the input terminals of alarm systems.

LD-81 Flood detector

The detector indicates room water floods (e.g. cellars, bathrooms). This information is sent to an alarm system for alert message transmission. It is connectible to an Oasis alarm system via a JA-81M wireless detector.

SD-283ST Wired combined smoke and heat detector with built in siren

Detector is used to detect fire hazards in the interior of residential or commercial buildings. The detector is also suitable for installing in caravan trailers or mobile homes. The product is not designed to be installed in industrial premises.

SD-503ST Stand-alone combined smoke and heat detector

The SD-503ST is used to detect fire hazards in the interior of residential or commercial buildings. The detector can be installed in mobile homes or caravans. The product is not designed to be installed in industrial premises.