The detector is used for human motion detection in the interior of a building. Thanks to the combination of motion and microwave detection, the detector is highly resistant to false alarms.
The detector guards the same way as a classic PIR motion detector.
When motion is sensed in the guarded area, the MW detector is activated to confirm the triggering of the PIR. Only after receiving a confirmed alarm signal from the MW unit, does the detector send an alarm report to the control panel.
|Power supply||Lithium battery type LS(T)14500 (3.6V/2 Ah AA), power supply type C|
|Typical battery lifetime||Approx. 2 years (PIR sensor sleep time 5min.)|
|Communication band||868 MHz, Oasis protocol|
|Communication range||Approx. 300m (open area)|
|Recommended installation height||2.5 m above floor level|
|PIR sensor detection angle/detection range||120° / 12 m (with basic lens)|
|MW detection range/ MW frequency||0.5 to 20m / 9.35 GHz|
|Operational environment according to EN 50131-1||II. indoor area|
|Operational temperature range||-10 to +40 °C|
|Dimensions||110 x 60 x 55 mm|
|EN 50131-1, EN 50131-2-4, EN 50131-6 EN 50131-5-3 classification||Grade 2|
|Complies with||ETSI EN 300220, ETSI EN 300 440-1, EN 50130-4, EN 55022, EN 60950-1|
|Can be operated according to||ERC REC 70-03|