Jablotron

JA-82SH The wireless shock and tilt detector

Detects shock and tilt on doors, windows etc. caused by an intruders attempts to force, smash, drill, or saw through. Has easy installation and uses digital signal processing. Features a memory of previous shocks.

The  wireless shock and tilt detector

JA-82SH The wireless shock and tilt detector



The detector is a component of the JABLOTRON ALARMS Oasis security system. It has two selectable operation modes. The mode for the detection of shocks / vibrations of doors, windows, etc. can be used to indicate attempts to breach these by force.

The tilt detection mode can be used to indicate unwanted tampering with the object to which the detector is firmly fixed. This may be used for safes, artworks etc.

The detector uses a semiconductor tri-axial accelerometer with digital output. Its signal processing guarantees a high immunity against false alarms.

The detector communicates wirelessly using Oasis protocol and it is battery powered.

 

Specifications

Power supply lithium battery
type CR-123A, 3 V 1400 mAh
Typical battery lifetime approx. 2 years (with max. 20 activations a day)
Communication band 868 MHz, Oasis protocol
Communication range: approx. 300m (open area)
Dimensions 75 x 31 x 26 mm
Environment according to EN 50131-1 II.indoor general
Operating temperature range -10 to +40 °C
Classification Grade 2 EN 50131-1, CLC/TS 50131-2-6, EN 50131-5-3
Complies with ETSI EN 300220, EN50130-4,EN55022, EN 60950-1
Can be operated according to ERC REC 7003


 

Prodotti correlati

CA-550 tilt detector

The CA-550 tilt detector detects movement of the car in two axes (x and y). No mechanical parts are used in the detector. Detection is achieved through electronic acceleration metering.

DK-10 - bonnet / door switch

Classic bonnet and door switch.

DK-11 bonnet and door switch

Bonnet and door detector with a rubber cover.

GT-933 shock sensor

Can be connected to an Athos alarm sytem for 24 hour operation and transmits information about a car accident, either by phone or to an ARC.

JA-181M sensore magnetico con ingresso supplementare via radio

Progettato per rilevare l’apertura di porte o fi nestre. Il sensore di apertura porta reagisce alla rimozione della relativa unità magnete. È in grado di innescare un allarme antintrusione immediato o ritardato.

JA-182SH sensore shock o di ribaltamento (tilt) via radio

Il funzionamento del sensore via radio JA-182SH è controllato da due modalità. La modalità di rilevamento shock (vibrazione) monitora porte, fi nestre, pareti leggere, ecc. segnalando qualsiasi tentativo di sfondamento utilizzando la percussione.

JA-183M sensore magnetico compatto via radio

Il dispositivo via radio JA-183M offre una pratica dimensione compatta e capacità di protezione aperture ottimale. È progettato per rilevare l’apertura di porte o fi nestre.

JA-185B sensore di rottura vetro via radio

Sensore via radio di rottura vetro di piccole dimensioni, in grado di rilevare la rottura di finestre. Progettato per l’installazione all’interno di edifici.