JA-84P wireless motion detector with built-in camera

The JA-84P provides human body movement detection including visual alarm verification. The detector’s camera is equipped with a flash and infrared light to take photos in the dark.

wireless motion detector with built-in camera

JA-84P wireless motion detector with built-in camera


The camera is capable of taking monochromatic pictures with a resolution of 160x128 pixels. A sequence of 4 photos is taken when movement is detected. It is stored in the detector’s internal memory and it is also transmitted wirelessly to the control panel to be sent to an alarm receiving center and/or to the owner’s mobile phone display. The battery-powered detector communicates via the OASIS radio protocol.

JA-84P sample photos


Voltage: 2x Lithium battery type CR123 (3.0V)
Typical battery lifetime: approx. 3 years (max. 80 photo sequences)
Communication band: 868 MHz, Oasis protocol
Communication range: max. 300m (open area)
Recommended installation height: 2.0 to 2.5 m above floor level
PIR detection angle/detection range: 50° / 12 m (basic lens)
Resolution of the camera 160 x 128 pixels, B&W
Internal memory photo format bit map (BMP)
Format of the photos transmitted to server JPG
Horizontal camera capture angle 50°
Range of the flash max. 3 meters
Typical photo transmission time to the control panel 25 sec
Typical photo transfer time from the system to server 15s/GPRS (JA-80Y)
2s /LAN (JA-80V)
EN 50131-1,CLC/TS 50131-2-2, EN 50131-5-3 classification: grade 2
Operational environment class according to EN 50131-1 II. indoor general
Operational temperature range -10 to +40 °C
Dimensions 110 x 60 x 55 mm
Complies with ETSI EN 300220, EN 55022, EN 50130-4, EN 60950-1
Can be operated according to ERC REC 70-03

Produits associés

JA-80IR Infra-red barrier

The JA-80IR is designed to detect the interruption of infra-red beams by intruders walking between IR transmitters and receivers. The unit comprises an Optex sensor and a Jablotron transmitter and is powered by 4 lithium batteries.

JA-80P wireless PIR motion detector

JA-80P has a PIR sensor which covers up to 112m² of floor ( optional pet-immune lens). It uses digital signal processing to avoid false alarms. It also has an input to connect a door sensor.

JA-80PB wireless motion/glass-break detector

The JA-80PB has a PIR motion sensor, a dual glass-break detector (9 meter range) and an input for a door sensor. Enrolling:control panels, UC/AC relay receivers ,JA-80L indoor sirens (movement = sound)

JA-80W wireless PIR / MW motion detector

The detector is used for human motion detection in the interior of a building. Thanks to the combination of motion and microwave detection, the detector is highly resistant to false alarms.

JA-83P wireless PIR motion detector

This new compact PIR detector is available giving great performance and less visual impact. It works with Jablotron’s OASiS alarm system. It is designed to detect human body movement over 112 m ² of floor space inside buildings.

JA-83P-PACK PIR motion detector kit

A kit of four JA-83P PIR motion detectors with 112 m2 floor area coverage, high-reliability digital analyses, ideal for no-door-detector-input applications.

JA-85P mini-size wireless motion detector

The JA-85P is a mini-size PIR sensor suitable for small rooms or car interiors. Enrollable to control panels, UC and AC receivers JA-80L indoor sirens (indicates activation by sound) and CA-18xx car alarms.

JA-86P wireless dual-zone PIR motion detector

The JA-86P detects human movement inside buildings.2-zone detection gives superior immunity to moving pets. The battery-powered detector communicates via OASIS radio protocol.