JA-82SH The wireless shock and tilt detector

Detects shock and tilt on doors, windows etc. caused by an intruders attempts to force, smash, drill, or saw through. Has easy installation and uses digital signal processing. Features a memory of previous shocks.

The  wireless shock and tilt detector

JA-82SH The wireless shock and tilt detector

The detector is a component of the JABLOTRON ALARMS Oasis security system. It has two selectable operation modes. The mode for the detection of shocks / vibrations of doors, windows, etc. can be used to indicate attempts to breach these by force.

The tilt detection mode can be used to indicate unwanted tampering with the object to which the detector is firmly fixed. This may be used for safes, artworks etc.

The detector uses a semiconductor tri-axial accelerometer with digital output. Its signal processing guarantees a high immunity against false alarms.

The detector communicates wirelessly using Oasis protocol and it is battery powered.



Power supply lithium battery
type CR-123A, 3 V 1400 mAh
Typical battery lifetime approx. 2 years (with max. 20 activations a day)
Communication band 868 MHz, Oasis protocol
Communication range: approx. 300m (open area)
Dimensions 75 x 31 x 26 mm
Environment according to EN 50131-1 II.indoor general
Operating temperature range -10 to +40 °C
Classification Grade 2 EN 50131-1, CLC/TS 50131-2-6, EN 50131-5-3
Complies with ETSI EN 300220, EN50130-4,EN55022, EN 60950-1
Can be operated according to ERC REC 7003


Productos relacionados

CA-550 tilt detector

The CA-550 tilt detector detects movement of the car in two axes (x and y). No mechanical parts are used in the detector. Detection is achieved through electronic acceleration metering.

DK-10 - bonnet / door switch

Classic bonnet and door switch.

DK-11 bonnet and door switch

Bonnet and door detector with a rubber cover.

GT-933 shock sensor

Can be connected to an Athos alarm sytem for 24 hour operation and transmits information about a car accident, either by phone or to an ARC.

JA-181M Detector magnético inalámbrico

Está diseñado para la detección de apertura de puertas o ventanas. El detector reacciona al distanciamiento del imán.

JA-182SH Detector inalámbrico de choque o inclinación

El detector se controla mediante dos modos. El sensor de choque (vibraciones) monitorea puertas, ventanas, tabiques, etc. Indica intentos de superación por fuerza bruta. El modo de detección de inclinación detecta la manipulación no autorizada de un

JA-183M Detector magnético inalámbrico en miniatura

El detector JA-183M ofrece las mismas propiedades de un detector de apertura, pero con un diseño más pequeño.

JA-185B Detector inalámbrico miniatura de rotura de cristal

El JA-185B detecta la rotura de cristales de ventanas y puertas en el recinto donde está instalado. El detector utiliza el análisis del cambio en la presión del aire, combinado con la detección del sonido característico de la rotura de cristales