Jablotron

JA-63S-100 Wireless optical smoke and heat detector for the JA-100 system

Detector is designed to detect the presence of fire inside residential or commercial buildings. It should not be installed in industrial premises.

Wireless optical smoke and heat detector for the JA-100 system

JA-63S-100 Wireless optical smoke and heat detector for the JA-100 system

The battery-powered detector has a built-in local warning siren combined with a transparent LED indicator.

The alarm information can also be transferred via a wireless connection to the JABLOTRON 100 system.

The JA-63S–100 detector combines an optical smoke sensor with a heat sensor. Both sensors have their outgoing signals processed digitally, resulting in higher false alarm immunity. The optical sensor works using a light diffusion principle and is very sensitive to the presence of large-sized particles which are characteristic of dense smokes. By contrast, the sensor is less sensitive to small-sized particles which are typical of cleanly burning fires. In particular, the smoke sensor is not capable of detecting the by-products of cleanly-burning fluids such as alcohols, for instance. This deficiency is compensated for by the built-in heat sensor. This sensor provides a slower reaction when compared to the smoke sensor, but is much better at reacting to fires with rapidly rising heat producing only a little smoke. Smoke/heat sensor participation is configurable by DIP switches.

Technical specifications

Voltage 1x AA 1.5 V alkaline battery
Battery lifetime typically 2 years
Communication frequency 868,1 MHz, JABLOTRON protocol
Wireless communication range 100m (in open space)
Smoke detection optical, light dispersion
Smoke sensor sensitivity m = 0.11 - 0.13 dB/m pursuant to EN 14 604
Temperature detection class A2 pursuant to EN 54-5
Fire-alarm temperature +60 °C to +70 °C
Acoustic power of the built-in siren min. 85 dB/3m A
Operational temperature range -10 to +70 °C
Dimensions diameter 126 mm, height 65 mm
Complies with EN 14 604, A2 EN 54-5, EN 50130-4, EN 55022, ETSI EN 300220, EN 60950-1
Terms of use ERC REC 70-03

Related products

EI208DW Stand-alone carbon monoxide detector with display

The product serves for the detection of CO (carbon monoxide) gas and early warning to avoid the harmful effects of this gas on human health.

EI208W Stand-alone carbon monoxide detector

The product serves for the detection of CO (carbon monoxide) gas and early warning to avoid the harmful effects of this gas on human health.

JA-110F Bus flood detector

The detector is used to indicate flooding (in basements, bathrooms, etc.). This information is transmitted to the alarm system bus.

JA-110G-CO Bus module for connection of an Ei208W(D) CO detector

This is a plug-in module designed for direct installation in a stand-alone Ei208W or Ei208DW CO detector, which enables its bus connection to the JABLOTRON 100 system.

JA-110ST Bus combined smoke and temperature detector

The JA-110ST bus fire detector (optical and temperature detection) detects fire in residential and commercial buildings . Allows you to set detection: optical and thermal, optical or thermal, optical only or temperature only.

JA-110TP Bus indoor thermostat

In a building, up to 4 thermostats can be installed that can control up to 4 independent circuits. The product is a component of the JABLOTRON 100 system, is addressable and occupies one position in the system.

JA-111ST Bus combined smoke and heat detector

It is used to detect fire hazards in the interior of residential or commercial buildings. The product is not designed to be installed in industrial premises. The detector is powered via the control panel bus (EN 54-7; EN 54-5).

JA-111ST-A Bus combined smoke and heat detector

Used to detect a fire risk in the interior of residential or commercial buildings. It comprises of a siren that indicates a fire alarm, both from the entire detector and from another fire detector in the system.