Jablotron

JA-80L Wireless internal siren

The JA-80L is a mains-powered siren sounding alarms/exit/entrance delays. Depowering it during an alarm reports tampering (intruder verification). Enrolling:control panels,detectors,remotes,keypad inputs, JA-80H bell button.

Wireless internal siren

JA-80L Wireless internal siren

 

It can be used as the following: An indoor alarm siren A wireless door bell A detector-triggered chime A sounder for entrance and exit delay beeps Thief verification The siren is mains-powered and communicates via OASIS wireless protocol. It can form part of an alarm system or be used as a stand-alone device. When used as part of an alarm system, it sounds when an intruder alarm has been triggered and confirms the actual presence of an intruder in the building by sending a tamper signal when it gets unplugged. Installation shall only be undertaken by qualified technicians holding a training certificate issued by an authorized distributor.

Specifications

Power 230V/50Hz, 1W
Communication band 868 MHz, Oasis protocol
Communication range approx. 100 m (open area)
Sounds (melodies) 8 selectable for buttons and detectors, and an alarm siren sound 95 dB / 1 m
Max. number of enrolled devices 1x Oasis JA-80 control panel
8x Oasis wireless buttons and detectors
Safety class II according to EN60950
Operating environment general, indoor -10 to +40 °C
Housing IP40 according to EN 60529
Mechanical immunity IK08 according to EN 50102
Operating conditions ERC REC 70-03
The JA-80L complies with ETSI EN 300220, ETS 300683, and EN 60950

Related products

ACM-OS360 Additional piezo siren

Additional piezo siren for the OS-360/360A siren