Jablotron

JA-152NM Wireless handle lock with magnetic detector

A wireless module for PG outputs integrated into a mechanical lock that can be used to lock a door or window handle when the premises alarm is set. An integrated magnetic sensor allows you to monitor the closing status of a window or door.

Wireless handle lock with magnetic detector

JA-152NM Wireless handle lock with magnetic detector

The lock offers a selectable function for automatic unlocking if a fire alarm is triggered.

  • The magnetic sensor in this module only provides information about the status of the window or door; it does not detect intrusion into the building (The product is not certified as a fully electronic security detector).
  • Before the installation of the module, suitability for particular mounting should be verified with regard to the window frame or the handle.
  • To ensure proper functioning of the handle lock the handle must be capable of being fully turned to the closed position. A window or door handle cannot be locked in the micro ventilation or full ventilation position
  • The module is a device of the JABLOTRON 100+ system, is addressable and occupies one position in the system.

Specifications

Compatible with F-Link 1.4.0 and higher
Power supply 2 AA alkaline batteries (LR6) 1.5 V 2400 mAh
Warning: Batteries are not included in the product package.
Typical battery service life approx. 2 years (1 locking / unlocking a day)
Communication band 868.1 MHz, JABLOTRON protocol
Communication range approx. 300 m (free terrain)
Dimensions 229 mm x 34 mm x 18 mm
Environment II. indoor, general (in accordance with EN 50131-1)
Operating temperature range -20 °C to +60 °C
It also meets the requirements of ETSI EN 300 220-1, EN 50130-4, EN 55022, EN 60950-1
Operation conditions ERC REC 70-03

Related products

JA-150M Wireless magnetic detector with 2 universal inputs

It is a magnetic detector with two configurable independent inputs. The detector is also designed to detect the handling of roller blinds, if it is equipped with a CT-01 roller detector.

JA-150MB Wireless magnetic detector with 2 universal inputs - brown

It is a magnetic detector with two configurable independent inputs. The detector is also designed to detect the handling of roller blinds, if it is equipped with a CT-01 roller detector.

JA-151M Mini wireless magnetic detector

The JA-151M is designed for the detection of windows or door opening. It has a unique small design suitable for residential or commercial installations.

JA-151MB Mini wireless magnetic detector

The JA-151M is designed for the detection of windows or door opening. It has a unique small design suitable for residential or commercial installations.

JA-182M Wireless invisible magnetic detector

The JA-182M is designed for the detection of windows (door) opening. An “invisible” magnetic sensor is installed into plastic or wooden window frames and is therefore totally discreet.

JA-183M Wireless magnetic detector - smaller design

The JA-183M offers a conveniently small size and great door detector features. It is designed to detect doors or windows opening. The door opening detector reacts to the removal of its magnet unit.

JA-183MB Wireless magnetic detector - smaller design

The JA-183MM offers a conveniently small size and great door detector features. It is designed to detect doors or windows opening. The door opening detector reacts to the removal of its magnet unit.

JA-110M Bus module for magnetic detectors - 2 inputs

The JA-110M bus module is used to connect wired magnetic door/window detectors to the bus and contains two independent inputs programmable to be NC/NO or using a balancing resistor.