Jablotron

UR-01 Versatile DIN-rail mounted relay

It is convenient to keep this relay in your tool bag as it allows you to solve a great number of tasks.

Versatile DIN-rail mounted relay

UR-01 Versatile DIN-rail mounted relay

It features switching contacts with galvanic and safety isolation for the switching of 230 V AC/16 A power loads, which can be used in one of eight selectable modes. The relay is designed for installation on a DIN rail and its characteristics are set with the use of switches under a cover.

It offers 8 functions:

  • Switching relay – standard NO/NC relay
  • Bistable relay – e.g. for lighting control from multiple locations with the use of buttons
  • Bistable relay with time limitation – e.g. for the control of lights from more places (but the light will not remain on longer than for the set time)
  • Delayed disconnection – e.g. for the rundown of a fan
  • Delayed switching on – the startup of an electric motor in star - delta mode.
  • Impulse by leading edge – activation of an appliance for a specified time
  • Impulse by trailing edge – e.g. to switch on a fan after turning the lights off
  • Regular impulses – at a set interval it will activate a device for 10 min – e.g. for the regular heating of a heating ladder in the bathroom

Technical specifications

Power 230 V AC/50 Hz, protection class II.
Power consumption 0.3 W/max. 0.8 W
A input 230 V AC
Relay contact rating
(relay contacts are galvanically separated from the device)
Maximum switching voltage 250 V AC/24 V DC
Resistive load (cosφ=1) max. 16 A
Inductive load, capacitive load (cosφ=0.4) max. 8 A
Halogen lights max. 1000 W
DC 384 W
Minimum acceptable relay output through-wattage (DC) 0.5 W
Cross section of connecting wires max. 2 x 1.5 mm2
max. 1 x 2.5 mm2
Dimensions 18 x 90 x 65 mm, 1 DIN module
Operational environment indoor general
Operational temperature range -10 to + 40 °C
IP covering IP20, IP40 valid for front panel according to EN 60529
Also complies with: EN 60947-1, EN 60947-6-1, EN 50581.
Caution: The device should be connected to a circuit which is protected by a circuit breaker (max. 16 A).