Jablotron

GD-02-DIN Universal GSM communicator and controller

The GD-02-DIN universal GSM communicator and controller allows you to remotely control and monitor the state of various appliances. Standard SMS or ringing can be used as control commands.

Universal GSM communicator and controller

GD-02-DIN Universal GSM communicator and controller

The GD-02-DIN universal GSM communicator and controller allows you to remotely control and monitor the state of various appliances. Standard SMS or ringing can be used as control commands.

Two outputs (one power and one signal output), which may be of the state or impulse type, are available for control. For state reporting the GD-02-DIN is equipped with two inputs responding to a GND connection. Activation and deactivation of an input may be reported by means of an SMS, ringing or a combination of both the options. One of these inputs also provides an impulse counter function (it can be connected e.g. to an electricity meter, water meter, gas meter etc.). The status of impulses can be checked with the use of SMSes. The device also has an input for connection of a GD-02T thermometer, which supports temperature monitoring and a thermostat function, incl. setting of the comfortable and economic temperatures. Up to 10 authorized phone numbers can be saved in the device. The GD-02-DIN contains a backup battery maintaining its function even in the case of a power supply failure. The product is designed for DIN-rail installation. The functions can be set using GD-Link 2.1.0 software and higher (the USB cable for computer connection is supplied).

Specifications

Power supply~ 230 V / 50 Hz, device of protective class II.
Internal power consumption0.5 W / max. 1.2 W
Working frequency bands850 / 900 / 1800 / 1900 MHz (GSM/GPRS)
Max. load capacity of the REL1 power contacts250 V AC / 16 A
Max. load capacity of the REL2 signal output24 V DC / 100 mA
Output switching time in impulse modeadjustable from 1s to 24 h with an increment of 1 s
IN1, IN2 inputsactivated by GND connection, max. voltage 24 V DC
TH input for a GD-02T temperature sensormax. connection length 3 m, measurement range -30 °C to 125 °C
Auxiliary power supply output +5V5 V DC / max. 100 mA, not backed up
Typical backup time3 hours
Operating temperature range-20 to +50 °C
Ingress protection classIP20
Dimensions (without the antenna)90 x 36 x 58 mm, 2 DIN modules
In conformity withEN 60950-1, EN 55022, EN 61000-6-3, ETSI EN 301 511, ETSI EN 301 489-7

Related products

GD-04K Versatile GSM communicator and controller

The GD-04K versatile GSM communicator and controller allows you to remotely control various appliances and report statuses at the same time. It can be controlled remotely by means of a mobile phone with an SMS message or by ringing.