Jablotron

JA-162A Indoor wireless siren for electrical sockets

The JA-162A siren is designed indicate alarms inside a building It can also be used for other acoustic indications such as the activation of PG outputs, entry/exit delays or as a door bell.

Indoor wireless siren for electrical sockets

JA-162A Indoor wireless siren for electrical sockets

By pressing of the siren button an alarm can be silenced or an emergency alarm can be released (optional function). The siren is equipped with a backup battery in case of a power supply failure. The siren is equipped with a tamper sensor for the detection of unplugging. The siren is addressable and it occupies one position in the system

Technical specifications

Power supply 230 V/50 Hz, 0.5 W, protection class II
Supply voltage range 207 ÷ 253 V
Nominal current 41 mA
Maximal current 150 mA
Backup battery/lifetime 3.6 V; 170 mAh/3 years
Backup battery/minimum voltage when loaded 3.0 V
Backup battery/maximum voltage when unloaded 4.5 V
Battery low voltage 3.2 V
Communication frequency 868.1 MHz, JABLOTRON protocol
Communication range approx. 300 m (open area)
Sounds (melodies) 8 optional for PG output indication
Classification Security grade 2 / Environmental class II.
- according to EN 50131-1, EN 50131-4, EN 50131-5-3
- acoustic level 90 dB / 1 m
- back-up supply type W / 12-hour back-up
- operational environment indoor general
- operational temperature range -10 °C to +40 °C
- average operational humidity 75 % RH, non-condensing
- certification body Trezor Test s.r.o. (no. 3025)
Siren cover conformance IP40 according to EN 60529
Mechanical resistance IK08 according to EN 50102
Dimensions, weight 90 x 64 x 80 mm, 110 g
Also complies with ETSI EN 300 220, EN 50130-4, EN 55022, EN 60950-1
Can be operated according to ERC REC 70-03

Related products

JA-150A II Wireless internal siren

A wireless siren for indoor use, the JA-150A II is designed for acoustic alarm signaling, as well as entrance and exit delays and PG output activations in the security system.

JA-152A Wireless internal siren for an AC socket

The product is a wireless system device for the JABLOTRON 100+ . The siren is designed to indicate alarms inside a building. It can also be used for other acoustic indications such as activation of PG outputs, entry/exit delay or as a door bell.

JA-110A Bus internal siren

The JA-110A Bus siren is for indoor use and is designed to sound alarms, as well as entrance and exit delays and PG activations in the security system.

JA-110A II Bus internal siren with battery back-up

The JA-110A bus siren is for indoor use and is designed to sound alarms, as well as entrance and exit delays and PG activations in the security system.