JA-118N Eight-channel bus output module

The JA-118N eight-channel output module provides outputs for signaling the status of 8 sections, signaling IW / EW alarms in the 8 sections or the status of 8 PG outputs.

Declaration of conformity - JA-118N (PDF 318.56 kB)

JA-118N Eight-channel bus output module

The unit is designed for installation in a JA-190PL multi-purpose box. The outputs are isolated from the bus. The setting is done via a DIP switch.

It does not occupy any position in the system.

Specifications

Power	bus 12V (9 ... 15V)
Current consumption in standby output (open / closed)	5 mA / 10 mA
Current consumption for choice of cable	10mA
Maximum output current of + U (electronic fuse)	<100mA (current calculation necessary to add all attached devices)
Dimensions	77 x 40 x 15 mm
Classification	grade 2 according to EN 50131-1, EN 50131-3
Environment according to EN 50131-1	II. general indoor
Operating temperature range	-10 to +40 ° C
Complies with	EN 50130-4, EN 55022

Related products

AC-160-DIN Wireless multifunctional relay for DIN-rail installation

The wireless multifunctional relay is a component of the JABLOTRON 100 system, but it can be equally installed as a stand-alone device without a link to a control panel.

JA-110N Bus power output module PG

The JA-110N power output module PG offers a switching relay (16 A) with NO or NC modes . The corresponding PG output copied is set by DIP switch (one of the PG outputs PG 1 - 32).

JA-110N-DIN Bus DIN power output module

The JA-110N-PG-DIN module is designed for a DIN rail. Provides a power relay output. It can be used, for example, to control lighting, fans, etc. The relay output is programmable by control panel.

JA-111N Bus signal output module PG

The JA-111N power output module PG offers a switching relay (2 A/60V DC) with NO or NC modes . The corresponding PG output copied is set by DIP switch (one of the PG outputs PG 1 - 32).

JA-112I Bus section/output PG activation indicator

The JA-112I indicator indicates section security or activation of a PG (1 - 128) output by lighting up a red LED. It is connected to the control and indicating equipment via a bus.

JA-120N Bus module for control of an electric lock

The JA-120N module is designed for the power supply and control of electric locks and release systems from the system bus. It is fitted with batteries that ensure the initial current impulse required to open el. locks.

JA-150N Wireless power output module PG

The JA-150N is a wireless PG power output module (10 A/230 V AC). It copies the state of a selected PG output in the JA-100 system (PG1 to PG 32).

JA-151N Wireless signal output module PG

The JA-151N is wireless PG power output module (1 A/24 V DC). It copies the state of a selected PG output in the JABLOTRON 100 system (PG 1 to PG 32).

Webdevelopment