JA-106KR Control panel with built-in GSM/GPRS/ LAN communicator and radio module
It also offers a flexible solution to protect residential complexes, office buildings and businesses that need a system with many sections. The desired settings and size of the system are programmed via F-link software.
The JA-106K offers:
- up to 120 bus or wireless zones
- up to 300 user codes
- up to 15 sections
- up to 32 programmable outputs
- 20 independent calendars
- SMS reports from the system to 30 users
- 15 users have the option to use SMS and voice reports
- 5 ARCs
- 5 optional protocols to the ARC
The panel has a built-in GSM / GPRS / LAN Messenger, which allows voice, SMS or GPRS communication with end users or ARC centers. It is equipped with a 1 GB memory card for storing event data, voice messages, storing images, etc.
The control panel has:
- two independent bus terminals for connections
- 1 connector for a built-in radio module (JA-111R)
- 1 connector for a PSTN communication module (JA-190x)
|Control panel power supply||~ 230 V/50 Hz, max. 0.2 A, with T400 mA fuse, protection class II|
|Back-up battery||12 V; 7 to 18 Ah|
|Maximum battery charging time||72 h|
|BUS voltage (red-black)||12.0 to 13.8 V|
|Max. continuous consumption from the control panel||1200 mA permanently, valid for each BUS output
(2000 mA for 10 minutes)
|Max. continuous consumption for backing up 12 hours||Without GSM communicator||LAN – OFF – 1150 mA
LAN – ON – 1105 mA
|With GSM communicator||LAN – OFF – 1130 mA
LAN – ON – 1085 mA
|Max. continuous consumption for backing up 24 hours||Without GSM communicator||LAN – OFF – 550 mA
LAN – ON – 505 mA
|With GSM communicator||LAN – OFF – 530 mA
LAN – ON – 485 mA
|Max. number of devices||120|
|LAN communicator||Ethernet interface|
|Dimensions||357 x 297 x 105 mm|
|Reaction to invalid code entry||Alarm after 10 wrong code entries|
|Event history||approx. 7 million latest events, incl. date and time|
|Power supply unit||type A (EN 50131-6)
T 031 note: In case of a main power failure is the system backed up for 24 hours and at the same time is a failure report sent to the ARC.
|2G GSM communicator||850 / 900 / 1800 / 1900 MHz|
|3G GSM communicator||2100 MHz|
|Environmental class||class II, indoor general according to EN 50131-1|
|Operational temperature range||-10 °C to +40 °C, relative humidity 75%|
Security grade 2 according to EN 50131-1, EN 50131-3, EN 50131-6, EN 50131-10, EN 50131-5-3, EN 50136-1, EN 50136-2
|Operating frequency (with the JA-11xR module)||868.1 MHz|
|Radio emissions||ETSI EN 300 220-2 (module R), ETSI EN 301 419-1, ETSI EN 301 511 (GSM)|
|EMC||EN 50130-4 ed. 2, EN 55022 ed. 3, ETSI EN 301 489-7|
|Operational conditions||ERC REC 70-03, ERC DEC (98) 20|
|Certification body||TREZOR TEST: (JA-101K, JA-101K-LAN, JA-106K), ANPI: INCERT T014(A) (JA-101K, JA-106K)|
|Caller’s identification||ETSI EN 300 089|
The JA-106K is a JA-100 alarm system control panel. It offers flexible settings and allows the smart protection of bigger family houses, offices, companies and apartment complexes. The settings are programmed by F-Link SW.
A full version of the control panel of the JABLOTRON 100+ security system.
The JA-107K is an advanced version of the JABLOTRON 100+ security system. It is designed for large living spaces, offices and businesses. It can only be installed by a trained technician with a valid Jablotron Alarms certificate.
The JA-110T bus isolator is designed to electrically seperate and protect vulnerable parts of the bus . It is powered by the bus. It can be installed in a JA-190PL box.
BP12-18 serves for power powering of device which need 12 V DC. The PLV-CP-L box is recommended for back-up batteries with capacities of 7 Ah - 18 Ah (a capacity of up to 26 Ah can be used with an external box).