A full version of the control panel of the JABLOTRON 100+ security system.
It offers the flexible setting and intelligent protection of mainly large residential buildings, administrative buildings and companies that need a multi-section system. The installation can be implemented in a bus, wireless, or a combined design. It is equipped with a 3G GSM module, whose main benefit is an increase in the data transmission rate (especially photos) to the MyJABLOTRON application or to ARCs.
The required adjustments and sizing of the system are carried out through F-Link software. The JA-106KR-3G control panel offers:
The control panel features integrated GSM 2G/3G and LAN communicators that enable voice, SMS and data communication with end users or ARCs.
The control panel contains:
|Compatible with||F-Link 1.4.0 or higher|
|Control panel mains supply||230 V / 50 Hz, power supply type A (EN 50131-6)|
|Back-up rechargeable battery||12V; 7 to 18 Ah (Warning: The battery is not included)|
|Maximum battery recharging time||72 h|
|Max. continuous consumption from the control panel||1.2 A|
|Max. continuous consumption for backup||up to 12 hours 1.2 A with an 18 Ah battery|
|Event memory||more than 10 mil. events with the date and time|
|Alarm verification function by another detector or repeated reaction from the same detector with a selectable delay (10 s - 2 min)|
|Dimensions||357 x 297 x 105 mm|
|Classification||security level 2, in accordance with EN 50131-1, EN 50131-6, EN 50131-5-3, EN 50131-3, EN 50131-3, EN 50131-10, EN 50136-1 and EN 50136-2|
|Environment||II. indoor, general (in accordance with EN 50131-1)|
|Operating temperature range||-10 °C to +40 °C|
|It also meets the requirements of||ETSI EN 300 220-2, EN 50130-4, EN 55022, EN 60950-1, EN 301 511 (GSM), ETSI EN 301 489-7, ETSI EN 301 419-1, ETSI EN 300 089|
|This control panel is the version with the JA-110R radio module|
|Operating frequency||JA-110R two-way Jablotron 868.1 MHz protocol|
|Operation conditions||ERC REC 70-03, ERC REC (98) 20|