JA-101KR-LAN3G Control panel with built-in 3G / LAN communicator and radio modul
It is equipped with a GSM 3G module, whose main benefit is an increase of the data transmission rate (especially photos) to the MyJABLOTRON application or to ARCs.
The required adjustments and sizing of the system are carried out through F-Link software. The JA-101KR-LAN3G control panel offers:
- up to 50 wireless or bus zones
- up to 50 user codes
- up to 8 sections
- up to 16 programmable PG outputs
- 20 mutually independent schedules
- SMS and voice reports from the system to up to 8 users
- remote control via SMS, voice menu and the MyJABLOTRON applications
- 4 adjustable ARCs
- 5 selectable protocols for an ARC
- automatic detection of a 2G/3G network with preference to the faster network.
The control panel features integrated 2G/3G GSM and LAN communicators that enable voice, SMS and data communication with end users or ARCs.
The control panel contains:
- A JA-111R radio module
- A 4 GB memory card for saving the data of events, voice messages, saving photos etc.
- 1 terminal board for bus connection
- 1 internal connector designed exclusively for a radio module (JA-111R)
- 1 LAN connector
- 1 USB connector for control panel setting and transferring photos
- 1 connector for connecting another communicator or module (e.g. PSTN)
|Control panel power supply||~ 230 V/50 Hz, max. 0.1 A, with T200 mA fuse
~ 110 V to 120 V/60 Hz, max. 0.2 A, with T400 mA fuse, protection class II
|Back-up battery||12 V; 2.6 Ah|
|Maximum battery charging time||72 h|
|BUS voltage (red-black)||12.0 to 13.8 V|
|Max. continuous consumption from the control panel||
400 mA permanently
1000 mA for 5 minutes
|Max. continuous consumption for backing up 12 hours||Without GSM communicator||LAN – OFF – 123 mA
LAN – ON – 78 mA
|With GSM communicator||LAN – OFF – 103 mA
LAN – ON – 58 mA
|Max. continuous consumption for backing up 24 hours||Without GSM communicator||LAN – OFF – 37 mA
LAN – ON – Not possible
|With GSM communicator||LAN – OFF – 17 mA
LAN – ON – Not possible
|Max. number of devices||50|
|LAN communicator||Ethernet interface (LAN versions only)|
|Dimensions||258 x 214 x 77 mm|
|Reaction to invalid code entry||Alarm after 10 wrong code entries|
|Event history||approx. 7 million latest events, incl. date and time|
|Power supply unit||type A (EN 50131-6)
T 031 note: In case of a main power failure is the system backed up for 24 hours and at the same time is a failure report sent to the ARC.
|2G GSM communicator||850 / 900 / 1800 / 1900 MHz|
|3G GSM communicator||2100 MHz|
|Environmental class||class II, indoor general according to EN 50131-1|
|Operational temperature range||-10 °C to +40 °C, relative humidity 75%|
Security grade 2 according to EN 50131-1, EN 50131-3, EN 50131-6, EN 50131-10, EN 50131-5-3, EN 50136-1, EN 50136-2
|Operating frequency (with the JA-11xR module)||868.1 MHz|
|Radio emissions||ETSI EN 300 220-2 (module R), ETSI EN 301 419-1, ETSI EN 301 511 (GSM)|
|EMC||EN 50130-4 ed. 2, EN 55022 ed. 3, ETSI EN 301 489-7|
|Operational conditions||ERC REC 70-03, ERC DEC (98) 20|
|Certification body||TREZOR TEST: (JA-101K, JA-101K-LAN, JA-106K), ANPI: INCERT T014(A) (JA-101K, JA-106K)|
|Caller’s identification||ETSI EN 300 089|
The JA-110T bus isolator is designed to electrically seperate and protect vulnerable parts of the bus . It is powered by the bus. It can be installed in a JA-190PL box.
BP12-18 serves for power powering of device which need 12 V DC. The PLV-CP-L box is recommended for back-up batteries with capacities of 7 Ah - 18 Ah (a capacity of up to 26 Ah can be used with an external box).