JA-111N Bus signal output module PG

The JA-111N power output module PG offers a switching relay (2 A/60V DC) with NO or NC modes . The corresponding PG output copied is set by DIP switch (one of the PG outputs PG 1 - 32).

Declaration of conformity - JA-111N (PDF 317.21 kB)

JA-111N Bus signal output module PG

The module communicates via the digital bus.

It can be installed in JA-190PL multipurpose boxes .

The module is non-addressable (no position in the alarm system).

Specifications

Relay contact:
Power	bus 12V (9 ... 15V)
Current consumption during backup (relay open / closed)	5 mA / 25 mA
Current consumption for choice of cable	25 mA
Maximum switching voltage	50 V AC / 60V DC
Maximum switching current	max.2
Minimum switching current
Dimensions	70 x 38 x 15 mm
Classification	grade 2 according to EN 50131-1, EN 50131-3
Environment	EN 50131-1. general indoor
Operating temperature range	-10 to +40 ° C
Complies with	EN 50130-4, EN 55022

Related products

AC-160-DIN Wireless multifunctional relay for DIN-rail installation

The wireless multifunctional relay is a component of the JABLOTRON 100+ system, but it can be equally installed as a stand-alone device without a link to a control panel.

JA-110N Bus power output module PG

The JA-110N power output module PG offers a switching relay (16 A) with NO or NC modes . The corresponding PG output copied is set by DIP switch (one of the PG outputs PG 1 - 32).

JA-110N-DIN Bus DIN power output module

The JA-110N-PG-DIN module is designed for a DIN rail. Provides a power relay output. It can be used, for example, to control lighting, fans, etc. The relay output is programmable by control panel.

JA-112I Bus section/output PG activation indicator

The JA-112I indicator indicates section security or activation of a PG (1 - 128) output by lighting up a red LED. It is connected to the control and indicating equipment via a bus.

JA-118N Eight-channel bus output module

The JA-118N eight-channel output module provides outputs for signaling the status of 8 sections, signaling IW / EW alarms in the 8 sections or the status of 8 PG outputs.

JA-120N Bus module for control of an electric lock

The JA-120N module is designed for the power supply and control of electric locks and release systems from the system bus. It is fitted with batteries that ensure the initial current impulse required to open el. locks.

JA-150N Wireless power output module PG

The JA-150N is a wireless PG power output module (10 A/230 V AC). It copies the state of a selected PG output in the JA-100 system (PG1 to PG 32).

JA-151N Wireless signal output module PG

The JA-151N is wireless PG power output module (1 A/24 V DC). It copies the state of a selected PG output in the JABLOTRON 100+ system (PG 1 to PG 32).

Webdevelopment