Jablotron
AC-160-C Mounting-box-fitted wireless multifunctional power relay

The wireless multifunctional power relay is a component of the JABLOTRON 100 system. Enrolled to the control panel, the relay copies selected PG outputs.

AC-160-DIN Wireless multifunctional relay for DIN-rail installation

The wireless multifunctional relay is a component of the JABLOTRON 100 system, but it can be equally installed as a stand-alone device without a link to a control panel.

JA-110I Bus section/output PG activation indicator

The JA-110i indicator signals section setting or PG output activation (1-32) by a red LED . It is connected to the control panel via the bus.

JA-110N Bus power output module PG

The JA-110N power output module PG offers a switching relay (16 A) with NO or NC modes . The corresponding PG output copied is set by DIP switch (one of the PG outputs PG 1 - 32).

JA-110N-DIN Bus DIN power output module

The JA-110N-PG-DIN module is designed for a DIN rail. Provides a power relay output. It can be used, for example, to control lighting, fans, etc. The relay output is programmable by control panel.

JA-111I Universal LED indicator RGB

The JA-111I indicates activations of a section or PG output activations (1-32) by multi-colored LEDs (red, green, blue and yellow).

JA-111N Bus signal output module PG

The JA-111N power output module PG offers a switching relay (2 A/60V DC) with NO or NC modes . The corresponding PG output copied is set by DIP switch (one of the PG outputs PG 1 - 32).

JA-118N Eight-channel bus output module

The JA-118N eight-channel output module provides outputs for signaling the status of 8 sections, signaling IW / EW alarms in the 8 sections or the status of 8 PG outputs.