JABLOTRON 100+
The new model upgrades key system parameters and provides an ideal solution to the security needs of larger buildings such as blocks of flats, schools or larger companies.
Implement bigger installations
The JABLOTRON 100+ retains the best elements of the JABLOTRON 100 model with an extension of the system user options. It allows the connection of multiple detectors and enables them to control a large number of programmable outputs.
600
Users
600 Users
The JABLOTRON 100+ is the ideal solution for a simple school access system. Each employee or student of the school receives a chip that allows access to the configured premises. Only qualified people can get into the school or cloakroom. Newly, thanks to the function to copy user rights very quickly and easily, you can set up what premises the student can access or where the teacher and where the school caretaker can get to. All for up to 600 users.
50
SMS reports
50 SMS reports
In a company that has 15 departments, you can set up reporting from the system for up to 3 employees from each department and also set up which reports each department will receive. Additionally, aggregate reports from all departments can be sent to up to 5 other employees. Generally, it will concern for example the building manager or the receptionist.
64
Calendars
64 Calendars
The JABLOTRON 100+ alarm also enables you to control the switching on of equipment at pre-defined intervals. To maintain water purity the filter system in a hotel pool must be turned on at precise intervals. In the same way, the lawn watering system can be turned on up to 4 separate times during the day. All of this can be handled by the JABLOTRON 100+ with an emphasis on reducing operating costs.
230
Detectors
230 Detectors
Imagine a block of flats with 15 flats. The JABLOTRON 100+ will allow up to 15 new peripherals to be installed in each flat. This allows you the possibility of securing individual flats not only against burglary, but also against flood, fire or CO leaks, all from a single control panel.
128
programmable outputs
128 programmable outputs
Increasing the number of programmable outputs gives you sufficient options, for example, to control each light in the villa separately. Switch on the ventilation when it senses that people are present, or switch off the electricity after completely securing the building. It can also control lights through motion detectors and automate the opening of entrance gates.
600
Users
600 Users
The JABLOTRON 100+ is the ideal solution for a simple school access system. Each employee or student of the school receives a chip that allows access to the configured premises. Only qualified people can get into the school or cloakroom. Newly, thanks to the function to copy user rights very quickly and easily, you can set up what premises the student can access or where the teacher and where the school caretaker can get to. All for up to 600 users.
50
SMS reports
50 SMS reports
In a company that has 15 departments, you can set up reporting from the system for up to 3 employees from each department and also set up which reports each department will receive. Additionally, aggregate reports from all departments can be sent to up to 5 other employees. Generally, it will concern for example the building manager or the receptionist.
64
Calendars
64 Calendars
The JABLOTRON 100+ alarm also enables you to control the switching on of equipment at pre-defined intervals. To maintain water purity the filter system in a hotel pool must be turned on at precise intervals. In the same way, the lawn watering system can be turned on up to 4 separate times during the day. All of this can be handled by the JABLOTRON 100+ with an emphasis on reducing operating costs.
230
Detectors
230 Detectors
Imagine a block of flats with 15 flats. The JABLOTRON 100+ will allow up to 15 new peripherals to be installed in each flat. This allows you the possibility of securing individual flats not only against burglary, but also against flood, fire or CO leaks, all from a single control panel.
128
programmable outputs
128 programmable outputs
Increasing the number of programmable outputs gives you sufficient options, for example, to control each light in the villa separately. Switch on the ventilation when it senses that people are present, or switch off the electricity after completely securing the building. It can also control lights through motion detectors and automate the opening of entrance gates.
The new type of bi-directional communication increases the quality of signal transmission, but keeps the same energy consumption. Save your time and money by setting up the sensitivity and other functions remotely through F-Link.
Same energy consumption
as by one-directional communication.
Frequently asked questions about the JABLOTRON 100+
Questions and answersNo, in "Service" mode PG control is dropped, and this will always be the case, but we have recently implemented a "Maintenance" mode, which is designed for smaller interventions. This mode will allow, for example, the replacement of the batteries without having to enter "Service" mode and thus cause the PGs to be dropped. At the same time, it is possible to allow you to enter "Maintenance" mode also as the system administrator.
Innovations in video-verification
Our video-verification IP cameras have been improved with the addition of new features in the MyJABLOTRON app and software configuration, as well as the creation of an interface to enable their connection to an alarm receiving centre.
ARC interface
JABLOTRON offers easy and simple connection to an ARC with a range of paid services. The viewing for the ARC operator is easily made from the cameras enrolled by an installation partner in the system.
Live viewing in a widget
Video verification is now even faster! Opening live viewing is newly possible directly in a widget without the need to run an app and the video in several steps.
Timeline zoom
Reach the detail of the timeline with the zoom. Simply swipe up with your finger and easily find a specific time. With the timeline it is possible to reach the level of seconds.
Download a defined recording
Download recordings with a length of up to 60 minutes and save them in the gallery. When the free minutes or the set time of storing the videos are exceeded, the system automatically deletes the memory.
Branded PoE switches
Powering cameras with the new JABLOTRON switches is possible to up to 250 meters. In the portfolio you will find a PoE switch with 4 or 8 ports.
ARC interface
Live viewing in a widget
Timeline zoom
Download a defined recording
Branded PoE switches
New products
Ceiling PIR motion detector
This detector offers a 360 ° detection coverage with a radius of up to 5.5 m for installation at a height of 3.5 m. A certified PLV-P-ST mounting pad can be purchased for the ceiling PIR detector to allow the comfortable placement of the cabling under the detector.
Internal siren for an AC socket
The backed-up local siren is used to indicate an alarm inside the facility, with the option of detecting the type of alarm according to the type of signalling. It offers a higher sound output of 105 dB / m and 8 selectable melodies to indicate programmable outputs.
PIR motion detector with basic pet immunity
The detector detects the movement of persons within a distance of up to 12 meters. At the same time, it is expanded by the basic pet immunity. Detector ignores the movement of small animals of up to 25 kg with a maximum height of 40 cm, up to a distance of 7 meters, but still meets EN and INCERT standards.
The new F-Link 2.0.0 is coming
The upgraded version of the F-Link configuration system makes it easier for certified professional installers to install and manage large systems. Discover below some of the 40 new features!
Day / night mode
Now you can activate peripheral or programmed output responses in the system based on an astronomical calendar which can accurately determine sunrise and sunset at a specific location with the help of GPS coordinates.
New calendar logic
The calendar allows you to set the time when the selected action will be activated. With the Timing feature you can set up to 4 specific times within one day for activation. The Repeat feature allows you to repeat actions at the selected interval within one calendar event.
Copying the User Rights
This feature allows you to select a model user and then easily copy the rights for selected groups of users. Thanks to that you can quickly assign rights, code changes, time-limited access, sections, programmable outputs or SMS reports.
One detector activates several PGs
Extending the number of activations of the programmable outputs of a peripheral shifts the possibilities of home automation to a different level. One peripheral now can activate any number of relevant programmable outputs.
Maintenance mode
A new mode allows access from F-link, J-link, or through the keyboard without switching off programmable outputs in the installation. The batteries of the wireless peripheries can be easily replaced because under Maintenance mode, only alarm messages are deactivated.
Final door reaction
Adding the final door reaction speeds up the arming process. New reaction “Final door” shortens the Exit delay to 5 seconds when the detector is deactivated. This feature brings benefits in the form of significant battery savings.
Other new and innovated products
Find out more about all our new and innovated products, a total of 32 of them. A clear overview of the technical specifications in one place.
Other new and innovated products
Find out more about all our new and innovated products, a total of 32 of them. A clear overview of the technical specifications in one place.
