Links
- CA-02 Fox - Car alarm - manual (129 kB)
- Declaration of Conformity - CA-02 (79 kB)
Home Products Car Products Car Alarms CA-02 FOX modular car alarm
CA-02 FOX modular car alarm
The CA-02 Fox car alarm is a simple modular car alarm.
It is to be installed in the interior of cars with 12V and a negative ground.
The alarm can be operated by the ignition key, a hidden switch or by the original remote control for central locking.
The status of the car alarm is indicated by an LED indicator.
The built-in vibration detector has two levels of sensitivity and a digital filter which provides a high immunity to false alarms. It responds with either a warning or an alarm trigger or both. The warning mode causes a short siren chirp in the case of vibration detector activation. In alarm mode the alarm is triggered if a vibration is followed by another one within 15 sec. If both modes are activated then the first vibration will cause a short siren chirp and the other vibration (within 15 sec.) will trigger the alarm.
A built-in current sensor will trigger the alarm if electrical equipment is switched ON while the CA-02 is armed. The current sensor will be activated 10 minutes after arming. This prevents the cooling fan from triggering the alarm. The sensor can be disabled to allow the use of additional equipment (independent heating, fridge etc.)
Specifications
| Voltage | 9 – 15VDC |
|---|---|
| Current consumption | max. 11mA |
| Working temperature range | -40°C to +85°C |
| Duration of alarm | 30 s |
| SIR output | 1.2 A |
| PGM output | 0.2A |
| Current sensor | 10 min. exit delay |
| Vibration detector | 2 levels of sensitivity |